Insulated Metal Panels Manufacturers USA

PortaFab is one of the world’s leading modular building systems manufacturers. This Missouri-based manufacturer takes pride in its ISO 9001:2015-certified prefabricated and affordable insulated metal panels. They have installed millions of square feet of insulation panels worldwide by partnering with dealers participating in domestic installations.  

PortaFab’s thick insulation panels are energy-efficient due to their polyisocyanurate core and substrate of one-fourth-inch hardboard. Its 24-gauge steel back and 26-gauge painted embossed face make it resilient against heavy impact and high-traffic areas. 

These easy-to-install panels require no maintenance and are available in anodized, metallics, and Kynar finishes. These panels have various specifications with sizes up to 4×20 feet and thicknesses up to six inches.

Main Products: 

Insulated Metal Panel

AWIP specializes in the design and construction of foam composite insulated metal panels. They focus on sustainable and economical insulated panels to meet customer demands for energy-efficient and durable prefabricated building products. They have two factories in Arkansas and Pennsylvania. 

AWIP’s striated insulated metal wall panel (ST40) has a standard width of 40 inches and 36 inches with lengths from 8 to 40 inches. The panel thicknesses are 2, 2.5, 3, and 4 inches, with corresponding insulating properties of 16, 20, 24, and 32. 

ST40 insulated metal panels come in embossed and striated exterior profiles with a standard gauge of 24 G-90 galvanized. It is available in gauges 24 and 22.  

Main Products: 

Wall Insulated Metal Panel

Formerly named Steel Builders, Inc., American Buildings has continued producing metal building products since 1947. Its service plants are in Utah, Texas, South Carolina, and Illinois. Its current owner is Nucor Corporation. 

AB’s CFR-IMP insulated standing seam roof panels have a high thermal R-value and foam core insulation. It has a width of 30, 36, and 42 inches with thicknesses of 2, 2.5, 3, 4, 5, and 6 inches and lengths of 9′-6″ to 53′-0″. 

Their SR2 Legacy insulated standing seam roof panels have a panel thickness of 2, 2.5, 3, 4, 5, and 6 inches with corresponding weights of 2.22, 2.34, 2.41, 2.62, 2.82, and 2.98 PSF.

Main Products: 

• Roof Insulated Metal Panel

2009 was the year when Green Span Profiles joined the insulated panel industry. The construction of its 70,000-square-foot factory in Waller helped diversify its products and services to customers, especially in the low-temperature and cold storage markets. 

Green Span takes pride in its nine insulated metal wall panel profiles. These panels come in standard thicknesses of 2, 2.5, 3, 4, 5, and 6 inches. They come in standard gauges of 26, 22, and 24. 

The panel widths are standard 42 inches, but they also offer a 45-inch wide partition panel. Its insulated metal panel profiles are CleanLine, MaxLine, Impression, WaveLine, INSULROCK, RidgeLine, MesaLine, MesaLine HSE, and ShadowLine.

Main Products:

• Wall Insulated Metal Panel

Established in 1987, Nucor Building Systems is a premier steel building manufacturer. After 36 years, it has expanded its factories in Utah, Carolina, Texas, Indiana, and South Carolina. Nucor offers insulation panel service in North America through its Authorized Nucor Builders network.

Nucor has a comprehensive library of insulated metal roof and wall panel systems. These cutting-edge and stylish insulated metal panels are energy-efficient, lightweight, durable, and easy to install. 

These insulated panels come in different colors with the latest coating technology available in the IMP and Legacy IMP Color Chart. These panels have a 100 percent high thermal performance with consistent R-values. Manufacturing of these panels follows North American Standards.

Main Products:

• Insulated Metal Roof Panel Systems
• Insulated Wall Panel Systems

Founded in 1968, Metl-Span is a pioneer in manufacturing insulated metal panels in the United States. Metl-Span has eleven insulated metal panel profiles with various lengths, width coverage, and thickness. These specialty insulated panels have a 1-to-2-hour fire rating with backup wall systems. 

These are 7.2 Insul-Rib™ Wall Panel (W-36″, L-8′-0″ to 40″ and THK-3 “-4″), and CF Architectural Horizontal Panels (W-24″, 30″, 36″, L-8′-0″ to 32′-0″, THK-2,2.5″, 3″, & 4”)

Other panels are Tuff Wall®, CF Tuff-Cast, CF Striated Wall Panel, CF Flute Wall Panel, Light Mesa, CF Light Mesa, CF Partition Wall, LS-36™ Insulated Roof and Wall Panel, and Sta. Fe Wall Panel.

Main Products:

• Wall Insulated Metal Panel

Bard Halladay and Graham D. Perley, Jr. established Perley-Halladay Associates, Inc. in 1961. They built the company to manufacture and design prefabricated building materials. Since then, the company has diversified its products into three insulated panel designs.  

The Profiled Wall Panels have a Polyurethane core insulation, and they come in five-panel types, such as CF 7.2 INSUL-RIB ™, CF Mesa, CF Light Mesa, CF Flute, and CF Striated. 

The Flat (Architectural) Wall Panels have four-panel types: ArchitecturaL, Tuff Cast™, CF Tuff Wall™, and Sante Fe™. The Specialized Panels have four-panel types: THERMALSAFE™ Fire-Resistant, CFR Insulated Metal Roof, and LS-36™ Insulated Metal Roof& Wall Exposed Fasteners. 

Main Products:

• Insulated Metal Panel