COSASTEEL can help you find the best PPGI & PPGL & GI steel coil manufacturer in America
COSASTEEL has established its PPGI & PPGL Coil subsidiary in Los Angeles, America
COSASTEEL has a good understanding of America’s PPGI & PPGL & GI steel coil
COSASTEEL introduces you to more PPGI & PPGL & galvanized steel coil manufacturers in America
As one of the three pillar industries of the U.S. economy, the steel industry plays an important role in all stages of the development of the national economy.
The development of iron and steel leads to economic development, and the recession of iron and steel leads to a weak economy. This article mainly writes about the manufacturers of galvanized and pre-painted steel coils in the United States, hoping to be helpful to your purchase.
The United States has relatively favorable resource conditions for the development of the steel industry, with abundant iron ore resources and very high grades. The mining industry is developed and there is a sufficient supply of raw materials and fuels.
Developed railway and water transportation provide convenient transportation conditions for the development of the steel industry.
The government attaches great importance to and supports the development of the steel industry.
Maintain technological progress in the steel industry. In the early stage, we paid more attention to the introduction and adoption of new technologies, and developed and innovated on this basis.
Large-scale production. In terms of the production system, it has realized the development model of enterprise integration and specialization simultaneously, giving play to the advantages of economies of scale in different product categories.
Metalwest is a leading processor and distributor of flat-rolled metal products in the United States. The company also provides services such as painting, polishing, and coating materials.
The company has a strong storage capacity and can provide customers with various specifications of plates and coils. And provide internal processing, including leveling, slitting, blanking, shearing, and polishing.
The company’s employees have professional product and processing knowledge, rich experience, and can provide customers with satisfactory services.
The specifications of the galvanized steel produced by the company are 10 gauge-30 gauge, 36″-72″ wide. And can be customized according to customer requirements.
MST Steel has three processing plants in the United States. Products are distributed in the United States, Canada, and Mexico.
MST Steel Corporation has established a good reputation in the United States. Not only limited to the steel industry but also involved in other industries, including construction, furniture, HVAC, and communications.
The company also provides leveling and shearing services for plates and blanks. And the company’s cold rolling mill can maintain very strict thickness tolerances. And the slitting production line is equipped with continuous thickness monitoring, no gasket tools, and shape correction.
The company has always stocked a large number of steel coils and sheets of various grades, which can be processed according to customer requirements.
The company’s galvanized steel standards include ASTM A653, JIS, and so on. The range is wide and the variety is complete.
Curtis Steel was founded in 1976. After years of development, it has become one of the largest distributors of flat steel products in Texas and has a good reputation in the industry.
The company has a complete sheet and coil production line with thickness ranging from ¼” to 30 gauge.
The company’s inventory is large and can be delivered immediately or the next day. And with internal processing equipment, we can quickly complete custom size orders for customers.
The company has multiple offices around the world to facilitate contact with local customers and provide better services.
The company produces commercial steel (CS type A, B, and C), formed steel (FS type A and B), deep drawing steel (DDS type A and C), ultra-deep drawing steel (EDDS), structural steel (SS) -Further designated by grades (33, 37, 40, 50, 80), high-strength low-alloy steel (HSLAS).
Vision Metals was founded in 2010. After more than ten years of development, Vision Metals has become a company fully dedicated to providing services to its customers.
The company has 50 years of comprehensive business and flat rolling experience and can provide customers with high-quality products, first-class customer service, and very competitive prices.
The company always maintains an inventory of 4,000 tons, which contains many different types of steel. It is to be able to supply customers promptly.
The company’s factory covers an area of more than 30,000 square feet and always maintains an inventory of 4,000 tons, which contains many different types of steel. It is to be able to supply customers on time.
The company can provide slit coils with any combination of width and gauge thickness ranging from 0.008 inches to 3/8 inches.
Hascall Steel was founded in 1971. After more than 50 years of development, the company has a professional team and high-level service. A cost-effective solution for meeting customer needs, deadlines, and budgets.
The company has always been committed to detail and precision and has always been at the forefront of steel processing services. We have professional knowledge and commitment to quality in slitting steel, blanking steel, cut-to-length steel, edge adjustment steel, cold-rolled steel, or shear steel.
The company’s flat steel coils have specific widths ranging from ½ inch to 72 inches and thicknesses ranging from 0.010 to 0.325.
Metals USA offers a variety of carbon steel, aluminum and stainless steel products, and the company provides a large inventory at the National Service Center, with employees with extensive processing capabilities and dedicated in-house expertise.
The company’s organization is spread across many locations in the United States, with excellent product quality and a complete service chain. In addition to offering a wide range of products, Metals USA is also an industry leader in providing customers with standard and professional processing functions.
Calstrip Industries was established in 1939. So far, the company has developed into a factory serving the entire US-Mexico border. The company’s geographical location is superior, the transportation is convenient, and there is a dedicated logistics team that can provide customers with products on time.
Calstrip has developed from the early secondary processing of cold-rolled flat steel to the service center business. The company focuses on complex supply chain management and kanban inventory management to achieve timely delivery.
Calstrip Industries and its professional staff are committed to providing customers with the highest standards of services and products. The company continuously improves its processes to improve the quality of its products and services, and to increase production efficiency.
The company has also adhered to the SO 9001:2008 international standard. The product quality is excellent and the price is competitive.
After decades of development, the company has become one of the best steel coil product suppliers in the United States, with exquisite craftsmanship and rich experience.
All steels of the company are tested, and the quality control system is the most advanced in the industry. The company has become one of the best sources of galvanizing, cold rolling and tin rolling mill products.
The company also provides services such as slitting, embossing, cut to length, storage and warehousing, and logistics.
The company produces galvanized steel coils with a thickness of .0127″ to .1380″. There are three grades: Commercial, Forming, and Structural.
Alliance Steel has become one of the leaders in the supply of flat steel and coil processing in the United States. The company not only supplies steel and other products, but also involves in the fields of Automotive, Construction, Agriculture, Transportation, Energy, and Material Handling.
The company has experienced amazing growth in the past ten years and now has a variety of coil processing equipment and facilities to better serve customers.
The company also has internal processes including slitting, multi-punching, cut-to-length cutting, stretcher leveling, shearing, cold rolling, and laser cutting.
The company produces pre-coated galvanized steel coils with a thickness of .015″-.135″ and a length of 6.00″ -144″.
While the structural adjustment of the US steel industry has increased industrial concentration, it has also reduced the operating costs of US steel companies and enhanced their international competitiveness.
One of the characteristics of the steel industry is that the amount of investment in fixed assets is relatively high. The construction of a new plant often requires investment of hundreds of millions or even billions of dollars.
This article specifically introduces the suppliers and manufacturers of galvanized steel coils and pre-coated steel coils in the United States. Hope it can help you.