Cold Room Panel Manufacturers in Malaysia

Established in 1964, Wong Brothers is an expert in the refrigeration industry in Malaysia. They design, manufacture, fabricate, and install high-standard cold room panels for clean rooms, indoor snow, water chillers, cold stores, refrigerated warehouses, blast freezing, and others.

They fabricate their polyurethane panels according to the BS4840 British standard on the modular principle. They secure the panels by interlocking them and drawing them tightly with camlock. These panels have a width of 300, 900, and 1200mm.

The corner panels have a dimension of 300mm by 300mm. WB’s cold room standard panels of 2400 and 2700mm have a standard length of up to 12.0 meters.

Teck Chuan Industrial Sdn Bhd began its operation as Tech Chuan Refrigeration Sales & Service as a trader of cold room panels and refrigeration systems in 1995.  Since then, it has been producing prefabricated polyurethane cold room panels according to the standards in HACCP and GMP.

These rigid polyurethane cold room panels have a width of 1200mm and a length of up to 12 m. The panel thickness is 50, 75, 100, 120, and 150 mm, with a density of 42 kg/m3. It has 0.5mm PPGI and 0.5mm 304B stainless steel cladding with tongue and groove assembly.

The panels have a semi-camlock system, ensuring they can endure heavy pressure.

The ColdRoomMaster is a reputable cold room installation company that offers customers cold room solutions. Among the services they offer are the design, fabrication, maintenance, and repair of cold rooms in Melaka, Johor, and Kuala Lumpur.

ColdRoomMaster has a wide range of cold room panels that have high thermal efficiency with a minimum R-value of up to 40. These lightweight, sturdy, and easy-to-install cold room panels have a thickness of 2 to 12 inches.

Their cold room panels are usable in industrial cold rooms, chiller cold rooms, commercial cold rooms, kitchen cold rooms, walk-in cold rooms, blast freezers, island chillers, display chillers, and chiller showcases.

MECH REF is a young company that took advantage of the latest technology and equipment in polyurethane insulation panels. Since its establishment in 2017, MEC REF has invested in the most advanced long press and sheet metal roll-forming machinery for insulation panel manufacturing.

Their cold room panels have the same thickness and insulation cores of 50, 75, 100, 125, and 150mm with a width of 1200mm. The length could be customized and could reach up to 12,000 mm. It has an overall density of 40 to 45 kg/m2.

It has a white hot-dipped pre-painted galvanized sheet covering and is secured with a full cam-lock or semi-cam-lock system.

Chong Brothers had its initial foray into the production of PIR/PUR insulated panels and refrigeration systems. Since its inception in 1992, it has emerged as one of Malaysia’s leading manufacturers of insulated panels and cold room panels. They have a team of experts and modern machinery to produce cutting-edge panels.

Their PIR cold room panels have efficient thermal insulation properties and moisture absorption capabilities. These lightweight, CFC-free panels can stand against pressure and elements due to their higher MDI proportion. 

The CFC-free polyurethane (PU) cold room panels are replete with a higher density of mechanical strength. It is fire-resistant, moisture-absorbent, and corrosion-resistant.

Tescool is a 100 percent Malaysian-owned manufacturer that specializes in steel processing. Since its founding in 2005, it has continued its vision to offer the highest standard of products and services to customers. Today, it boasts a large collection of cold room panels for the food and beverage industry.

Tescool cold room panels have a thickness of 60, 90, 100, 130, and 150mm with a corresponding heat transfer efficiency of 0.33, 0.22, 0.20, 0.15, and 0.12 k/cal. The material thickness for color bond steel is 0.4mm, stainless steel is 0.6mm, GI steel for floors is 1.2mm, aluminum stucco is 0.7mm, and zincalume steel is 0.4mm.